Details
Pages
1 Page
Resource Type
Crafts, Decorations, Printables
Standard
Not standard specific
Subject
Seasonal, Interior Design
Languages
English
Product
Digital
Description
Brick House Photo Frame Ornament Happy Fathers Day Fabric Font Card Printable
Brick and mortar pattern with 1 1/2" x 2 1/2" picture window for 2x3" photo, great for instant print photos from cameras Instax, Prynt, Polaroid, or HP Sprocket, Kodak, Polaroid instant print photo printers. Can hang as an ornament, for Christmas, or as a door or drawer hanger, or pendant on a necklace, for a badge holder, use as a gift tag, or give away as presents.
Wonderful alternative to a greeting card!
3x4 inches folded when finished
I have a video, showing how to make my house shaped frame ornament at
https://www.youtube.com/watch?v=FWkMfgcLprE
Its for my gingerbread themed house frame ornament, different design, but same concept, instructions, and assembly apply.
Instructions:
Cut out 6 panels, keeping outside flaps to fold under and glue down later, trim away and into corners along lines provided, fold flaps under and glue down, thread 1/8" wide by 2 feet ribbon through 7 holes, in both directions, to connect panels 2 & 3 (top middle and top right) to make photo pocket, assemble panels and hot glue together. For strut legs, before hot glueing top part of strut leg to easel back brick panel (bottom right), cut a piece of clear vinyl or sheet protector the size of the strut leg's inner 5 lines (inside the flaps that get turned in), then cut the top & bottom strut leg panels into 2, along lines on both strut leg panels, fold under and glue. place clear piece between top & bottom of both strut leg panels, leaving a bendable, clear area between the top & bottom, for strut leg to bend, pitch out, to stand on table or shelf. Also, before completely assembling / glueing strut leg panels, at bottom right between the bottom half of the strut legs, lay 1" wide by 9" ribbon along inner right vertical side. Attach other end between bottom right corners of panels 3 & 4 (easel back with brick pattern), by attaching one end inside the strut legs,and with top half of finished strut leg attached to easel back, stand the house frame, push the other end of the ribbon in front, under frame, where it stands on it own, mark with a pin or tape, trim ribbon end to 1-2", tuck inside bottom right corner, between panels 3 & 4.
Add clear, ACID FREE sheet protector cut to size of photo, for protective photo sleeve in lieu of glass, to place inside photo pocket.
Can laminate.
Can also print onto washable, inkjet printer fabric, and sew outer edges, but iron on Therm o Web HeatnBond to the back of the fabric, as it will seal the circle holes, and allow for the frame to stand, along with keeping the edges from puckering. Can be found at Barnyarns, Hobbycraft, Walmart, Joann, Thermowebonline.com, & Michaels, 5 yard / 4.6 meter roll yields 32 inkjet printable interfacing sheets for fabric!
This Happy Father's Day card printable is perfect for card making printables, alone, or to add to card fronts, or for scrapbooking or other papercrafts!
letter size pdf printable sheet
Fabric font was created for Fabricated Frames business logo, and is simulated lengths of fabric to form letters, numbers, the alphabet in upper and lower case, other characters soon, also for word art, holidays, family relation title caption tags, sentiments, and other word art. Custom words and names upon request.
The Fabric Font is an actual fabrics / textile / sewing themed font for typeface, that you can buy, in my store on Classful at https://classful.com/product/fabric-font-download-110-characters-textiles-type-letter-number-symbols-typing-otf-digital-files-and-svg-clipart-bundle/ , to download, and install easily, as a plugin for word processing, image or photo editing software such as Adobe Photoshop or free Inkscape, vectored, to use in apps / programs that allow you to change the font style. Commercial license coming soon.
Can add embellishments or artwork in any of the spaces.
Fabric font available as captions / tags sheet, in multi colors, also as other cards, papercraft, and printable crafts!
Thank you!
Kristie Hubler
download and purchase from Classful at https://classful.com/shop/kristie-hubler
Fabric font, frame ornament structure, pattern, & art created / copyright protected by Kristie Hubler. All Rights Reserved. Not for resale. For personal use only. For licensing fabric in digital form, or print form, or on finished products, for resale, to purchase wholesale for resale, please contact Kristie Hubler at [email protected] fabricatedframes dot com
Brick and mortar pattern with 1 1/2" x 2 1/2" picture window for 2x3" photo, great for instant print photos from cameras Instax, Prynt, Polaroid, or HP Sprocket, Kodak, Polaroid instant print photo printers. Can hang as an ornament, for Christmas, or as a door or drawer hanger, or pendant on a necklace, for a badge holder, use as a gift tag, or give away as presents.
Wonderful alternative to a greeting card!
3x4 inches folded when finished
I have a video, showing how to make my house shaped frame ornament at
https://www.youtube.com/watch?v=FWkMfgcLprE
Its for my gingerbread themed house frame ornament, different design, but same concept, instructions, and assembly apply.
Instructions:
Cut out 6 panels, keeping outside flaps to fold under and glue down later, trim away and into corners along lines provided, fold flaps under and glue down, thread 1/8" wide by 2 feet ribbon through 7 holes, in both directions, to connect panels 2 & 3 (top middle and top right) to make photo pocket, assemble panels and hot glue together. For strut legs, before hot glueing top part of strut leg to easel back brick panel (bottom right), cut a piece of clear vinyl or sheet protector the size of the strut leg's inner 5 lines (inside the flaps that get turned in), then cut the top & bottom strut leg panels into 2, along lines on both strut leg panels, fold under and glue. place clear piece between top & bottom of both strut leg panels, leaving a bendable, clear area between the top & bottom, for strut leg to bend, pitch out, to stand on table or shelf. Also, before completely assembling / glueing strut leg panels, at bottom right between the bottom half of the strut legs, lay 1" wide by 9" ribbon along inner right vertical side. Attach other end between bottom right corners of panels 3 & 4 (easel back with brick pattern), by attaching one end inside the strut legs,and with top half of finished strut leg attached to easel back, stand the house frame, push the other end of the ribbon in front, under frame, where it stands on it own, mark with a pin or tape, trim ribbon end to 1-2", tuck inside bottom right corner, between panels 3 & 4.
Add clear, ACID FREE sheet protector cut to size of photo, for protective photo sleeve in lieu of glass, to place inside photo pocket.
Can laminate.
Can also print onto washable, inkjet printer fabric, and sew outer edges, but iron on Therm o Web HeatnBond to the back of the fabric, as it will seal the circle holes, and allow for the frame to stand, along with keeping the edges from puckering. Can be found at Barnyarns, Hobbycraft, Walmart, Joann, Thermowebonline.com, & Michaels, 5 yard / 4.6 meter roll yields 32 inkjet printable interfacing sheets for fabric!
This Happy Father's Day card printable is perfect for card making printables, alone, or to add to card fronts, or for scrapbooking or other papercrafts!
letter size pdf printable sheet
Fabric font was created for Fabricated Frames business logo, and is simulated lengths of fabric to form letters, numbers, the alphabet in upper and lower case, other characters soon, also for word art, holidays, family relation title caption tags, sentiments, and other word art. Custom words and names upon request.
The Fabric Font is an actual fabrics / textile / sewing themed font for typeface, that you can buy, in my store on Classful at https://classful.com/product/fabric-font-download-110-characters-textiles-type-letter-number-symbols-typing-otf-digital-files-and-svg-clipart-bundle/ , to download, and install easily, as a plugin for word processing, image or photo editing software such as Adobe Photoshop or free Inkscape, vectored, to use in apps / programs that allow you to change the font style. Commercial license coming soon.
Can add embellishments or artwork in any of the spaces.
Fabric font available as captions / tags sheet, in multi colors, also as other cards, papercraft, and printable crafts!
Thank you!
Kristie Hubler
download and purchase from Classful at https://classful.com/shop/kristie-hubler
Fabric font, frame ornament structure, pattern, & art created / copyright protected by Kristie Hubler. All Rights Reserved. Not for resale. For personal use only. For licensing fabric in digital form, or print form, or on finished products, for resale, to purchase wholesale for resale, please contact Kristie Hubler at [email protected] fabricatedframes dot com
Brick House Photo Frame Ornament Happy Fathers Day Fabric Font Card Printable Brick and mortar pattern with 1 1/2" x 2 1/2" picture window for 2x3" photo, great for instant print photos from cameras Instax, Prynt, Polaroid, or HP Sprocket,... more
5.0 (1) | @kristie-hubler Reviews
More from this shop
$1.20
$1.50
-20% Off
